FAQs
General Ute Canopy
Albeit it is most likely illegal we highly recommend not too. Of course possible if carrying something long and tailgate needs to stay open however this will place added pressure to the gas struts and also increase the chance of glass breakage.
Suggest a sliding window canopy. We can also add sliding window guard (perforated powder coat sheet metal) which will allow your sliding window to stay open for air circulation purposes and the guard will stop the possibility of your animal occupant escaping. A roof vent can also be added to the roof of your canopy for extra circulation.
Windows Tints will be 30% i.e. 70% light transfer.
Front Cabin Sliding window will be clear Glass.
Our ute canopies are weather proof not waterproof. Different manufacturing tolerances from vehicle manufacturers need to be addressed along with optional tailgate sealing strips if you are encountering any water leaks. Canopies should not be exposed to high pressure cleaners or automated car washes. Please refer to how to care for your canopy brochure, all of our canopies have a large rubber seal between the deck and canopy and generous side door seals as well as an internal drain feature for the rear door seal.
The actual tubs of most utes are not dust proof. Our ute canopies have a full rubber mounting seal and rear tailgate seal but most dust will enter via the vehicle tailgate and production gaps in the tub body as these generally don’t have seals from the vehicle manufacturer. Ute tailgate sealing strips are available as an option for most models which will assist with any minor dust issues. Contact your local Caddy branch for more information.
We do not endorse the fitting of roof top campers. We are aware it has been done by individuals with no reported issues but we have never tested the canopy to meet the requirements of a roof top camper so it is an unknown risk fitted to your vehicle. Fitting of a roof top camper is done at your own risk and may void warranty.
Ute tubs are generally NOT fully sealed so there is no reason why you cannot although the space will be limited, most canopies have an internal handle to open the canopy from inside.
Our Alpha canopies are a hand laid fibreglass one piece shell finished in automotive 2 pack paint, all locks and fitting hardware are either anodised Aluminium or stainless steel construction
This really depends on many factors ranging from vehicle type, 2WD or 4WD, Canopy type, whether vehicle has roof racks or not. Generally height clearance on average is around the 1.9 – 2m mark.
2m x 1.7m x 0.7m
Refer to ute canopy care guide. Most importantly ensure canopy securing clamps are tightened periodically.
GSX Ute canopy factory bars – 30kg evenly distributed over 2 bars
CMX Ute canopy factory bars – 60kg evenly distributed over 2 bars
Canopy upgraded with Rhino Vortex bars – 75kg evenly distributed over 2 bars
Canopy upgraded with Rhino heavy duty bars – 100kg evenly distributed over 2 bars
For more information please contact your closet store.
